Organic dissolvent MARMOT RMTL64

Lead free soldering » Auxiliary agents » Organic dissolvent MARMOT RMTL64

Technical Data Sheet

RMTL64

 

Product name: 

 Organic dissolvent MARMOT RMTL64

Description and key properties:

  • Solvent for dilution MARMOT rosin based fluxes range MTL 4xx, 5xx
  • Applicable as a component of ultrasonic cleaning bath
  • Does not cause corrosion unlike ethanol or isopropanol cleaners

Operating manual:

Applicable by dipping the part in the liquid or cleaning by brush, or in ultrasound bath.

 

 


 

Technical specification:

 

 

Form

Liquid

Aroma

Ether like

Density

0,885

kg/dm3

Melting point

 

C

Boiling point 

120+-2

C

Content

Min. 99,9

%

Color

Transparent with blue tint  (t) / colorless (ep)

 

 

 

 

 

 

Other proprieties:

Flammable Liquid

 

Flash Point

31

C

 

 

 

Ignition temperature   

287

C

 

 

 

 

 

 

 

 

 

Issued:

22.7.2008

Revised

25.01.2009

       

 

11.0.

Safety and health protection

 

 

11.1.

Long lasting and repeated contact with skin can cause irritation and sensibility, therefore is necessary to avoid direct contact.  In case when it is not possible exclude possibility of direct skin contact, the workers must wear suitable personal protective equipment. Work area must be ventilated. Do not drink or eat during work. Do not use naked flame. After work, hands should be washed with soap and warm water and cared with protective cream.

 

Fire safety

Highly flammable liquid. Forms explosive mixtures with air in a vaporous state.

Do not use naked flame, do not smoke and avoid possibility of appearance electric discharge.

Exhaust the fumes and keep the container closed.

 

 

11.2.

First Aid

 

Inhalation – in case of excessive inhalation of flux fumes emitted during soldering, remove affected person to fresh air.

Ingestion – in case of accidental Ingestion, wash out mouth with water and give enough pure water to drink.

Skin contact – in case of skin contact, wash the place with soap and warm water.

Eye contact – in case of eye contact, flush the eyes immediately with plenty of water.

In case of large health damage or eyes contact, seek medical attention. 

 

11.3.

Above mentioned precautions are recommended for health protection of the workers, obligatory measures are described in Safety Data Sheet (SDS) - if released, and do not substitute internal safety regulations of final customer.