Cleaning dissolvent MARMOT OTM19

Lead free soldering » Auxiliary agents » Cleaning dissolvent MARMOT OTM19

Technical Data Sheet

OTM19

 

Product name: 

 Cleaning dissolvent MARMOT OTM19 t / ep

Description and key properties:

  • OTM19t
  • Cleaning dissolvent for rosin based fluxes MARMOT range MTL 4xx, 5xx
  • High and fast dissolving effect
  • Does not cause corrosion unlike ethanol or isopropanol cleaners

 

  • OTM19ep
  • Cleaning dissolvent for not yet harden epoxy resin sealing materials
  • Replacement for halogen dissolvent like Freon or Dichloromethane
  • Does not cause corrosion unlike ethanol or isopropanol cleaners

Operating manual:

Applicable by dipping the part in the liquid or cleaning by brush.

Test carefully before final application OTM19 dissolves some plastic materials!

 It is not suitable for ultrasound cleaning due to fast evaporation.

 


 

Technical specification:

 

 

Form

Liquid

Aroma

Acetate like

Density

0,785

kg/dm3

Melting point

 

C

Boiling point 

82-82,5

C

Content

Min. 99,8

%

Color

Transparent with blue tint  (t) / colorless (ep)

 

 

 

 

 

 

Other proprieties:

Highly Flammable Liquid

 

Flash Point

0

C

 

 

 

Ignition temperature   

350–450

C

 

 

 

 

 

 

 

 

 

Issued:

22.7.2008

Revised

25.01.2009

       

 

11.0.

Safety and health protection

 

 

11.1.

Long lasting and repeated contact with skin can cause irritation and sensibility, therefore is necessary to avoid direct contact.  In case when it is not possible exclude possibility of direct skin contact, the workers must wear suitable personal protective equipment. Work area must be ventilated. Do not drink or eat during work. Do not use naked flame. After work, hands should be washed with soap and warm water and cared with protective cream.

 

Fire safety

Highly flammable liquid. Forms explosive mixtures with air in a vaporous state.

Do not use naked flame, do not smoke and avoid possibility of appearance electric discharge.

Exhaust the fumes and keep the container closed.

 

 

11.2.

First Aid

 

Inhalation – in case of excessive inhalation of flux fumes emitted during soldering, remove affected person to fresh air.

Ingestion – in case of accidental Ingestion, wash out mouth with water and give enough pure water to drink.

Skin contact – in case of skin contact, wash the place with soap and warm water.

Eye contact – in case of eye contact, flush the eyes immediately with plenty of water.

In case of large health damage or eyes contact, seek medical attention. 

 

11.3.

Above mentioned precautions are recommended for health protection of the workers, obligatory measures are described in Safety Data Sheet (SDS) - if released, and do not substitute internal safety regulations of final customer.